Chuango B11 - Page 20

1
2
3
4
Exit Delay
Exit delay is set to leave time for user to exit before the system is armed.
Log on the menu, press or , choose “System Settings”, press . [ ] [ ] [Enter]
Press or , choose “Entry Exit Delay”, press .[ ] [ ] [Enter]
Press or , choose “Exit Delay”, press .[ ] [ ] [Enter]
Input time for exit delay; press for confirmation.[Enter]
Exit delay time is calculated on seconds; default is 0 second (off); setup range is 0-999
seconds.
Note: Once delay time is set, when arm the system, one beep will be heard every second to
remind the user to leave , the reminding rhythm will speed up in the last 15 seconds.
Backlight Time
User can set standby time of the backlight on the blue LCD display accordingly.
Log on the menu, press or , choose “System Settings”, press . [ ] [ ] [Enter]
Press or , choose “Backlight Time”, press .[ ] [ ] [Enter]
Input time for backlight time; press .[Enter]
Timed Arm / Disarm
User can set timed arm and disarm according to daily schedule to avoid repeated
operation.
Timed Arm
Log on the menu, press or , choose “System Settings”, press . [ ] [ ] [Enter]
Press or , choose “Auto Arm/Disarm”, press .[ ] [ ] [Enter]
Press or , choose “Auto Arm Time”, press .[ ] [ ] [Enter]
Input exact time for arming; press .[Enter]
Timed Disarm
Log on the menu, press or , choose “System Settings”, press for [ ] [ ] [Enter]
confirmation.
Press or , choose “Auto Arm/Disarm”, press .[ ] [ ] [Enter]
Press or , choose “Auto Disarm Time”, press .[ ] [ ] [Enter]
Input exact time for disarming; press .[Enter]
1
2
Edit Greeting Message
When greeting message is set; turn on the alarm system or activate the touch keyboard;
the greeting message will be shown on LCD display.
[ ] [ ] [ ] means to delete, means to space, means to move backward, [ ] means
to move forward.
Log on the menu, press or , choose “System Settings”, press .[ ] [ ] [Enter]
Press or , choose “Edit Welcome”, press to define the greeting message. [ ] [ ] [Enter]
Backlight time is calculated on seconds; default is 20 seconds; setup range is 01-99
seconds.
Line Cut Alarm
When linecut alarm function is on, the control panel will alarm once the PSTN land line
is cut or pulled out even if the built-in siren was set to mute..
Turn On/Off Linecut Alarm
Log on the menu, press or , choose “System Settings”, press .[ ] [ ] [Enter]
Press or , choose “Linecut Alarm”, press .[ ] [ ] [Enter]
Press or , choose “On” or “Off”, press .[ ] [ ] [Enter]
“On” is to turn on the linecut alarm; “Off” is to turn off the linecut alarm.
Default setting is “On”, the linecut alarm is on.
Keypad Tone
User can turn on/off keypad tone accordingly.
Turn On/Off Keypad Tone
Log on the menu, press or , choose “System Settings”, press .[ ] [ ] [Enter]
Press or , choose “Keypad Tone”, press .[ ] [ ] [Enter]
Press or , choose “On” or “Off”, press .[ ] [ ] [Enter]
“On” is to turn on the keypad tone; “Off” is to turn off the keypad tone. Default setting
is “On”, keypad tone is on.
33
34
1
2
3
1
2
3
4
1
2
3
1
2
3
4
1
2
3