Ciena 3902 - Page 29

Turning Up the System 3-7
3902 Service Delivery Switch Hardware Installation and Start-up Manual
009-3205-001 Standard Revision D
Copyright
©
2013-2015 Ciena
®
Corporation July 2015
Procedure 3-2
Creating a New User Account
Follow this procedure to create a new user account.
Step Action
1 Create the new user account.
user create user <user>
access-level <limited|admin|super|diag> password
<password>
For example, the following command creates the super user account,
NewSuper, with the password changeme:
user create user NewSuper access-level super password
changeme
2 Display the accounts in the system.
user show
Example output:
> user show
+------------------- USER ACCOUNT TABLE ----------------+
| Username | Privilege | Flags |
+----------------------------------------------+-------+
| admin | admin | DP |
| esmUser | super | P |
| gss | diag | DP |
| su | super | DP |
| user | limited | D |
+----------------------------------------------+-------+
3 Repeat step 1 through step 2 for every remaining user account you want to
create.
4 When you are finished creating user accounts, save and complete the
process.
configuration save
You have created a user account.