Need help?Do you have a question about the Cinergia B2C10 and is the answer not in the manual?
General| Brand | Cinergia |
|---|---|
| Model | B2C10 |
| Category | Battery Charger |
| Language | English |
Explains safety symbols like DANGER, WARNING, and INFORMATION.
Emphasizes the importance of reading the manual and following safety precautions for personal and physical safety.
Explains how the EL can be operated (CI, CC, CP, CV) and connected (Independent, Parallel, Unipolar, Bipolar) for different applications.
Provides crucial safety guidelines for installation, including protective earth connection and precautions against electric shock.
Details the electrical connections required for the electronic load, including earth, input, and output terminals.
Explains the critical steps for connecting the protective earth wire to both the input and output terminals.
Describes the connection of an external emergency stop button to the X12 terminal for immediate shutdown.
Reinforces safety checks before operating the equipment, specifically regarding protective earth connection and wiring.
Describes the available operating modes: Constant Impedance (CI), Constant Current (CC), Constant Power (CP), Constant Voltage (CV), and Battery Mode (BM).
Details the Constant Impedance mode, allowing users to define resistance for each output phase and its parameter limits.
Outlines essential pre-powering checks and procedures for safely operating the electronic load.
Provides a step-by-step checklist for safely starting up the electronic load, from connecting mains to sending the Run signal.
Details the three methods for stopping the equipment when it is running: Full stop, Standby stop, and Ready stop.
Explains how to use the emergency stop button to bring the converter to the Alarm state and the precautions associated with its use.
Lists various alarm codes, their causes, and suggested solutions for troubleshooting.
Provides a step-by-step guide on how to reset alarms after the fault condition has been cleared.
Provides a procedure for replacing input fuses, emphasizing safety precautions and the need for exact same model fuses.
To Next Page
