Cinzone DA-1000 - 4.3.7 SATA Configuration

To Next Page

To Previous Page

DA-1000 User’s Manual

Chapter 4: BIOS SetupChapter 4: BIOS Setup

4.3.7 SATA Configuration

This allows you to configure mode of operation and to enable or disable for the

SATA interfaces. Use of default setting is recommended in the section.

■ SATA Mode

This allows to set AHCI mode (default) or IDE mode.

■ Serial-ATA Port 0

Default is Enabled.

■ Serial-ATA Port 1

Default is Enabled.