CipherLab 8000 Series Reference Manual

19
The mobile computer is designed for portable use, and it almost requires no installation
except installing the rechargeable battery pack (or the alkaline batteries for Model
8000/8020).
Warning: Read Important Safety Precautions before installation.
2.1 Installing the Battery Pack
Always prepare a spare battery pack, especially when you are on the road. To save power,
turn off the backlight when you are working in a bright work area.
1. Hold the mobile computer face down in one hand.
2. Press the battery lid release and slide the battery lid.
3. Remove the battery lid by the other hand.
4. Slide the battery pack into the battery compartment at a proper angle (30°~45°) so that
the contacts of the battery are pressed onto the protruding contacts inside the
compartment. Make sure that the battery is snugly fit into the compartment.
5. Replace the battery lid and lock it firmly.
Note: For a new battery, make sure it is fully charged before use.
Figure 4: Installing the Battery Pack
C HAPTER 2
Installation

CipherLab 8000 Series Specifications

General

Humidity	5% to 95% non-condensing
Communication	Infrared
Barcode Scanner	Laser
Connectivity	Infrared
Storage Temperature	-20°C to 60°C
Keypad	21 keys (numeric / functional)