CipherLab 8000 Series Reference Manual

Chapter 4 Configuration 63
4.2.2 Activate
The list shows the entire spare programs stored on the mobile computer. From the list, you
can select from 1 to 6 and activate one of them. The selected program will be copied to the
active memory sector and replace the current one.
Note: A font file cannot be activated.
To Clear File System
When <New Program Start> screen prompts “Press [ESC] to clear file”, it means the file
system in the SRAM will be cleared out by pressing [ESC]. Then there will be no data
(transactions, settings, etc.) stored on the mobile computer when the new program comes
into effect.
To Keep File System
To keep the data, simply press any other key.

CipherLab 8000 Series Specifications

General

Humidity	5% to 95% non-condensing
Communication	Infrared
Barcode Scanner	Laser
Connectivity	Infrared
Storage Temperature	-20°C to 60°C
Keypad	21 keys (numeric / functional)