CipherLab RS35

35
Quick Start
USE SNAP-ON CABLE
The Snap-on Cable provides a convenient way to charge your mobile computer as well as
data communication.
To install:
1) Remove the USB Type-C cable if it is connected with the RS35 mobile computer.
2) Hold the snap-on cup toward the
bottom of the RS35 mobile
computer, and place one of the
snap-on cup side to the side of
the RS35 mobile computer.
3) Push the Snap-on cup upwards to make its another side to be attached to the RS35
mobile computer.
4) A “click” sound is made once the Snap-on cable is connected with
the bottom of the RS35 mobile computer in place.
Snap-on Cup