CipherLab RS35 Reference Manual

36
RS35 Mobile Computer
5) Connect the USB plug to the approved adapter for external power connection, or plug
it to the USB port of PC/laptop for data transmission/ charging.
While the device battery is being charged, the LED on mobile computer will indicate
charging status.
Note:
(1) The USB Type-C cable must be removed before installing the snap-on cable.
(2) For data communication, you could also use a USB Type-C cable to connect the mobile computer
to your PC or laptop.
LED Indicator
Status
Description
Charging
Red, solid
Charging the mobile computer
Red, blink
Charging error
Green, solid
Charging complete
No light
The cable is not correctly connected

CipherLab RS35 Specifications

General

Battery Capacity	4000 mAh
NFC	Yes
RAM	3 GB
Storage	32 GB
Camera	13 MP rear, 5 MP front
Connectivity	USB
Ruggedness	IP67
Touch Panel	Multi-touch capacitive
Scanning	2D Imager
Wireless LAN	802.11 a/b/g/n/ac/d/h/i/r/k/v
GPS	GPS, GLONASS, BeiDou
Operating Temperature	-10°C to 50°C
Display Size	5.5 inches
Operating System	Android 10