Need help?Do you have a question about the Circutor AFQm 30 A and is the answer not in the manual?
General| Network Frequency | 50/60 Hz |
|---|---|
| Maximum continuous current | 30 A |
| Installation | DIN rail |
| Rated Voltage (Un) | 400 V AC (230 V AC) |
| Operating temperature | -25°C to +55°C |
Check device order, condition, included items, and perform visual inspection.
Proper handling, loading, unloading, and storage during transport.
Recommendations for storing the device to maintain its condition.
Guidelines for installation by authorized personnel, safety measures, and general advice.
Specifies environmental conditions and placement requirements for optimal device operation.
Recommendations for storing the device for extended periods.
Instructions for mounting the wall-type AFQm device.
Instructions for installing the rack-type AFQm device in a 19" cabinet.
Instructions for installing the cabinet-type AFQm device, including top panel orientation.
Details on cable cross-sections and connection requirements for different AFQm models.
Identification of connection terminals for various AFQm models.
Identifies connection terminals for specific Wall-type AFQm models.
Identifies connection terminals for the Rack-type AFQm-xxx-100R model.
Details connection terminals for specific Cabinet-type AFQm models.
Details connection terminals for specific Cabinet-type AFQm models.
Illustrates wiring configurations for different connection types.
Shows wiring diagram for 4-wire connection and current measurement on mains.
Shows wiring diagram for 4-wire connection and current measurement on load.
Shows wiring diagram for 3-wire connection and current measurement on mains.
Shows wiring diagram for 3-wire connection and current measurement on load.
Shows wiring diagram for 3-wire connection with 2 CTs on mains.
Shows wiring diagram for 3-wire connection with 2 CTs on load.
Guides for connecting multiple AFQm devices or cabinets in parallel.
Steps for connecting multiple individual AFQm devices in parallel.
Steps for connecting multiple AFQm cabinets in parallel.
Explanation of harmonics and their impact on electrical systems.
Defines fundamental terms related to harmonics for measurement and study.
Lists common harmonic generator loads and their characteristics.
Explains how active filters compensate for harmonic currents by injecting counter-phase currents.
Explains the principle of active filter operation using current difference and injection.
Guidance on sizing the active filter based on harmonic currents and installation features.
Describes the resonance detection system and potential erroneous detection.
Details the device's self-diagnosis system for checking hardware and software integrity.
Explains the various levels of thermal protection for the device.
Overview of the device's 3.5" TFT display and its areas.
Information displayed in the upper area of the screen.
Information and parameters shown in the central area of the display.
Describes the navigation and configuration keys in the lower area of the display.
Overview of the main screen interface for device status.
Shows the main screen for a single or master device, including status messages.
Shows the main screen for a slave device, including status messages.
Displays voltage and current Total Harmonic Distortion (THD) for each phase.
Displays Total Demand Distortion (TDD) as a ratio of harmonic to nominal current.
Displays harmonic current in absolute value for mains and load phases.
Shows voltage, current, and frequency readings for mains and load.
Displays active, reactive, apparent power, and power factor for the mains.
Displays active, reactive, apparent power, and power factor for the load.
Shows odd voltage harmonics from 3 to 25 for each phase.
Shows odd current harmonics from 3 to 25 for mains phases.
Shows odd current harmonics from 3 to 25 for load phases.
Displays voltage, load current, and mains current harmonics in a table format.
Displays the waveform of the mains current for each phase.
Displays the waveform of the load current for each phase.
Shows the mains voltage and current phasors.
Shows the load voltage and current phasors.
Lists occurred alarms with date, time, and description.
Lists active warnings and provides corrective actions for each.
Displays temperature readings for inductors and IGBTs.
Shows the device's IP address and netmask.
Displays serial number, HMI, and DSP software versions.
Shows the status, alarms, and temperature of connected slave devices.
Selects the display language for the device.
Displays informative specifications like model and type.
Configures the device type as Single, Master, or Slave for parallel operation.
Configures the operating mode, including harmonic filtering algorithm and enabled functions.
Selects specific harmonics to be filtered in Frequency Mode.
Sets minimum current and current limit for device operation.
Configures reactive power compensation modes (fixed value or range).
Configures harmonic filtering to comply with IEEE 519-2014 standard limits.
Configures current transformer parameters like number, position, and ratio.
Enables or disables the resonance alarm for harmonic filtering.
Configures Ethernet communication parameters like IP address and netmask.
Configures RS-485 communication parameters, primarily the Modbus address.
Sets the device's date, time, and timezone.
Configures setup and stop passwords for device access.
Saves the modified configuration values.
Details wiring requirements and maximum cable distance for RS-485 communication.
Details Modbus protocol and map for device communication.
Provides an example of a Modbus query for reading load current.
Lists Modbus map variables for load and mains measurements.
Explains Ethernet port connection using a crossover cable.
Describes accessing the device's web interface for configuration and viewing data.
Outlines standard maintenance procedures and intervals for the active filter.
Discusses fan operation, lifespan, symptoms of deterioration, and replacement.
Provides tools and steps for changing cooling fans on the 30A AFQm models.
Provides tools and steps for changing cooling fans on the 60A AFQm models.
Provides tools and steps for changing cooling fans on the 100A Rack AFQm models.
Provides tools and steps for changing cooling fans on the 100A Wall AFQm models.
Provides tools and steps for changing cooling fans on Cabinet type AFQm models.
Details maintenance for surge protective devices and fuses in specific cabinet models.
To Next Page