86
AFQm
Instruction Manual
9.- ETHERNET COMMUNICATIONS
For an installation with devices in parallel, the Ethernet connection can be made on any device.
9.1.- CONNECTION
The AFQm has an Ethernet port. This type of communication creates an intranet with IP communica-
tions.
If the device that connects to this port is a computer, the network cable must be a crossover Ethernet
cable, as shown in Figure 86.
Figure 86:RJ-45 connector: Crossover Ethernet connection diagram.
9.2.- WEB SITE
The device has a web site for viewing and configuring the parameters.
Figure 87 shows the main web server screen, from where you can access all of the information of the
AFQm.
Figure 87: Main screen of the web site.
To Next Page
Loading...