Circutor AFQm 30 A - Display Screens; Main Screen Overview; Single or Master Device Main Screen

48
AFQm
Instruction Manual
6.- DISPLAY
6.1.- MAIN SCREEN
6.1.1. - DEVICE SINGLE OR MASTER
Figure 42 shows the main screen of a “single” or “master” device.
Arrancando ...
RUN / STOP key
RESET key
Mains
% of lter power
Load
Active Power
Reactive Power
Current THD
Status messages
Active Power
Reactive Power
Current THD
Figure 42: Main screen.
It shows the Active Power and Reactive Power values, as well as the Current THD value in the Mains
and in the Load. The % of filter power used.
The key allows you to restart the device if an alarm has been generated and this has been
resolved.
The / key is the start and stop key of the active filter.
Use the and keys to navigate through the different display screens.
In the upper part of the screen, a message with the current status of the device is shown (Table 21).
Table 21:Status messages
Status messages
Starting
Description The AFQm is starting up.
Init
Description The device is starting the systems.
Waiting comms
Description Initiating internal communication systems
Waiting for conditions
Description Waiting for the conditions to be met in order to operate.