93
Instruction Manual
AFQm
19 Reset the fans maintenance meter by pressing the key.
10.4.- CHANGE OF COOLING FANS: AFQm OF 60A
Table 45:Tools needed (AFQm-xxx-060M)
Tools needed
Fan assembly replacement AFQm-xxx-060M, Code: 920122
2
Screwdriver for PH2 head screws
3
Screwdriver for Allen 3 head screws
Figure 93: Location of the cooling fans.
To proceed to change the set of fans:
1 Place the AFQm in STOP mode and disconnect the device from the power. If necessary, disconnect
all the connection cables and short-circuit the current transformers.
2 Wait for 1 minute for the capacitors to discharge before opening the device.
To Next Page
Loading...