51
Instruction Manual
AFQm
6.4.- HARMONIC CURRENT
Note: This screen is not visible on the “slave” devices.
Figure 46 displays the harmonic current in absolute value for each of the mains and load phases.
Figure 46: Harmonic current.
Use the and keys to navigate through the different display screens.
6.5.- VOLTAGE, CURRENT AND FREQUENCY
Note: This screen is not visible on the “slave” devices.
Figure 47 shows the Voltage, Current and Frequency screen.
Figure 47: Voltage, Current and Frequency display.
It shows:
The Voltage in each of the phases, L1, L2 and L3.
The Current in the Mains in each of the phases, L1, L2, L3 and Neutral.
The Current in the Load in each of the phases, L1, L2, L3 and Neutral.
The Frequency.
Use the and keys to navigate through the different display screens.
To Next Page
Loading...