Installing Your Phone
Verifying Phone Startup
Cisco Small Business Pro IP Phone SPA 50X User Guide (SIP) 22
2
Verifying Phone Startup
After receiving power and network connectivity, the phone executes a boot-up
sequence. During this sequence, phones with screens display the Cisco logo and
then “Initializing Network”. All of the lights on the phone will flash.
After your phone is successfully connected to the network and receives a basic
configuration, your phone line keys should glow green (on models with phone line
keys).
On models with screens, the phone displays the standard menu for the phone. The
date, name and number of the phone display on the top line of the LCD screen. At
the bottom of the LCD screen, softkeys are displayed over their associated soft
buttons.
On models with no screen, such as the Cisco SPA 501G, the lines should glow
green and you should hear a dial tone when picking up the handset or pressing the
speakerphone button.
To Next Page
Loading...
Need help?
General
