Cisco 509G User Manual

Using Basic Phone Functions
Placing a Three-Way Conference Call
Cisco Small Business Pro IP Phone SPA 50X User Guide (SIP) 43
3
STEP 3 Press the conf softkey again. All three parties are connected in the conference
call.
When you hang up, the other two parties are disconnected.
Cisco SPA 501G:
STEP 1 Press the Conference button during an active call. The first call is placed on hold, a
second line is opened, and you hear a dial tone.
STEP 2 Dial the second person’s telephone number.
STEP 3 Press the Conference button again. All three parties are connected in the
conference call.
When you hang up, the other two parties are disconnected.
Conferencing a Held Call with an Active Call
NOTE Does not apply to the Cisco SPA 501G.
If you have a call on hold and an active call, you can create a conference call
between the active call, the call on hold, and you.
With an active call and one or more calls on hold, press the confLx softkey.
• If you have only one call on hold, the conference call is created between the
three of you.
• If you have more than one call on hold, choose the held call you want to
conference in by pressing the line button of the call on hold.

Cisco 509G Specifications

General

Brand	Cisco
Model	509G
Category	IP Phone
Language	English