Cisco 509G User Manual

Using the Web Interface
Configuring Call Waiting
Cisco Small Business Pro IP Phone SPA 50X User Guide (SIP) 70
5
STEP 3 Under Call Forward, you can configure the following fields:
• CFWD All Dest—Forwards all calls to a single number that you enter.
• CFWD Busy Dest—Forwards all calls to another number when the phone is
busy. Enter the number to which to forward calls.
• CFWD No Ans Dest—Forwards calls to another number if there's no answer
at your phone. Enter the number to which to forward calls.
• CFWD No Ans Delay—Number of seconds to delay forwarding calls, if
there is no answer at your phone. Enter the number of seconds to delay.
STEP 4 At the bottom of the page, click Submit All Changes.
Configuring Call Waiting
Call waiting alerts you when you are on a call by ringing and displaying a status
message that you have another incoming call. If you turn call waiting off, incoming
calls do not ring your phone if you are on another call, and the caller hears a busy
signal or message.
To turn call waiting on or off:
STEP 1 Log in to the web interface.
STEP 2 In the Voice tab, click the User tab.
STEP 3 Under Supplementary Services, locate the CW Setting field.
STEP 4 Choose yes or no to enable or disable.
STEP 5 At the bottom of the page, click Submit All Changes.

Cisco 509G Specifications

General

Brand	Cisco
Model	509G
Category	IP Phone
Language	English