Cisco 509G User Manual

Using Basic Phone Functions
Placing a Three-Way Conference Call
Cisco Small Business Pro IP Phone SPA 50X User Guide (SIP) 42
3
To unpark a call, you can either use the unpark softkey (if you know the park line
number), or view a list of parked calls and unpark it from the list.
To unpark if you know the park line number:
STEP 1 Press the unpark softkey.
STEP 2 Enter the number of the park line (for example, the number that was entered in
Step 2 of “parking a call.”)
STEP 3 Press dial. The call is picked up on your phone.
To view a list of parked calls (and unpark from the list):
STEP 1 Press the Setup button.
STEP 2 Select Call Park Status.
STEP 3 Choose the parked call you want to retrieve and press unpark.
Placing a Three-Way Conference Call
You can perform conference calls by:
• calling both numbers and pressing the conf softkey
• conferencing an active and held call using the confLX softkey (not available
on Cisco SPA 501G)
Cisco SPA 502G, SPA 504G, SPA 508G, SPA 509G:
To initiate a conference call:
STEP 1 Press the conf softkey during an active call. The first call is placed on hold, a
second line is opened, and you hear a dial tone.
STEP 2 Dial the second person’s telephone number.

Cisco 509G Specifications

General

Brand	Cisco
Model	509G
Category	IP Phone
Language	English