Cisco 7811 User Manual

Setup Call Back Notification
Procedure
Step 1
Press Callback while listening to the busy tone or ring sound.
Step 2
Press Cancel to deactivate the call back.
Step 3
Press Exit to activate the call back.
Call Park
Call Park allows you to use your phone to park (temporarily store) a call, which you can then retrieve from
another phone (such as a phone at a coworker’s desk or in a conference room).
There are two ways you can park a call:
•
Park: Allows you to park an active call that you answered on your phone, and retrieve it from another
phone in the Cisco Unified Communications Manager system.
•
Directed Call Park: Allows you to park and retrieve an active call in two different ways:
•
Assisted Directed Call Park: Allows you to park an active call using a feature button.
•
Manual Directed Call Park: Allows you to park an active call by transferring it to a Directed Call
number.
For more information, contact your system administrator.
Park a Call Using Assisted Directed Call Park
Procedure
Step 1
During a call, press BLF Directed Call Park on a line that displays an idle Line Status indicator.
Step 2
Retrieve the call from any other Cisco IP Phone in your network as follows:
a) Enter the park retrieval prefix.
b) Dial the Directed Call number.
Step 3
If you do not retrieve the call within the time that your system administrator has set, you receive an incoming
call with notification of CallPark Reversion. At that time, you can press answer to answer the call. The other
phones can no longer retrieve that call.
•
Press Resume to resume the call on your phone.
•
Retrieve the call from another phone.
Cisco IP Phone 7811, 7821, 7841, and 7861 User Guide for Cisco Unified Communications Manager 10.0 (SIP)
33
Basic Operations
Setup Call Back Notification

Cisco 7811 Specifications

General

Brand	Cisco
Model	7811
Category	IP Phone
Language	English