Cisco 7821 Administration Guide

DescriptionParameter
Features that users are allowed to configure on line
keys.
To allow a feature, add the corresponding option as
shown below. Separate options with the semi-colon
(;).
• Speed dial: sd
• Busy Lamp Field (BLF) key to monitor a user:
blf
• Call pickup from a monitored line: cp
This option is only effective when the
blf option is added.
Note
Default: sd;
Adding the sd option automatically allows
users to configure speed dial to a monitored
line (speed dial with BLF) when the blf
option is added.
Note
Example, to allow all features:
sd;blf;cp
Example XML configuration:
<Customizable_PLK_options
ua="na">sd;</Customizable_PLK_options>
Customizable PLK Options
Activates or deactivates monitoring of the BLF list.
When set to Show, the phone assigns available line
keys in sequence, to monitor the BLF list entries. The
labels of the BLF list keys show the names of the
monitored users and the status of the monitored lines.
This setting only has significance when BLF List
URI is configured.
Example XML configuration:
<BLF_List ua="rw">Show</BLF_List>
BLF List
When set to Yes, the phone performs a blind transfer
when the *code is defined in a speed dial extended
function,. If set to No, the current call is held and a
new call is started to the speed dial destination.
Default: No
BXfer to Starcode Enable
Cisco IP Phone 7800 Series Multiplatform Phones Administration Guide
301
Cisco IP Phone Troubleshooting
General

Cisco 7821 Specifications

General

Brand	Cisco
Model	7821
Category	IP Phone
Language	English