Cisco 7821 User Manual

Procedure
Step 1 Press Contacts .
Step 2 Press Category, if it displays on the phone. Otherwise, skip the step.
Step 3 Do one of the following actions:
• Highlight the BroadSoft directory.
• Highlight one of the configured directories.
Step 4 Press Option.
Step 5 Select Edit Settings.
Step 6 Edit the Directory Name field.
Step 7 Press Save to apply the change.
Edit the Server Name of Your BroadSoft Directory
When your administrator disables the directory individual mode, the phone only displays BroadSoft directory.
When your administrator enables the directory individual mode, the phone displays all enabled directories
with default or customized names. The default names are:
• Enterprise
• Group
• Personal
• Enterprise Common
• Group Common
Only the directory that is enabled by your administrator can display in the Directories screen.
Note
Procedure
Step 1 Press Contacts .
Step 2 Press Category, if it displays on the phone. Otherwise, skip the step.
Step 3 Do one of the following actions:
• Highlight the BroadSoft directory.
• Highlight one of the configured directories.
Step 4 Press Option.
Step 5 Select Edit Settings.
Cisco IP Phone 7800 Series Multiplatform Phones User Guide
71
Contacts
Edit the Server Name of Your BroadSoft Directory

Cisco 7821 Specifications

General

Resolution	396 x 162 pixels
Lines	2
Speakerphone	Yes
Display	3.5-inch (89 mm) monochrome display
Ethernet Ports	2 x 10/100 Ethernet ports
Power	IEEE PoE Class 1
Headset Port	Yes
Protocols	SIP
Audio Codecs	G.711, G.722, G.729, iLBC
Weight	0.9 kg (1.98 lb)