EasyManuals Logo

Cisco 7962G User Manual

Cisco 7962G
110 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #38 background imageLoading...
Page #38 background image
10 OL-22333-01
You can use these additional methods to view multiple calls on multiple lines:
Transferring Calls
Transfer redirects a connected call. The target is the number to which you want to transfer the call.
Tips
If on-hook transfer is enabled on your phone, you can either hang up to complete the call, or press
Transfer and then hang up.
If on-hook transfer is not enabled on your phone, hanging up without pressing Transfer again
places the call on hold.
If you want to... Then...
View calls on
another line
1. Press .
2. Immediately press the line button .
Switch to call
overview mode
Press for the highlighted line.
The phone switches to call overview mode, displaying one call per line. The
displayed call is either the active call or the held call with the longest
duration.
To return to standard viewing mode, press and then immediately press
the line button.
If you want to... Then...
Transfer a call
without talking to the
transfer recipient
1. From an active call, press Transfer.
2. Enter the target number.
3. Press Transfer again to complete the transfer or EndCall to cancel.
Note
If your phone has on-hook transfer enabled, complete the transfer
by hanging up.
Talk to the transfer
recipient before transferring
a call (consult transfer)
1. From an active call, press Transfer.
2. Enter the target number.
3. Wait for the transfer recipient to answer.
4. Press Transfer again to complete the transfer or EndCall to cancel.
Note If your phone has on-hook transfer enabled, complete the transfer
by hanging up.
Redirect a call to a voice
message system
Press iDivert. For more information, see Sending a Call to a Voice
Message System, page 11.
?
?

Table of Contents

Other manuals for Cisco 7962G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 7962G and is the answer not in the manual?

Cisco 7962G Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Case materialABS
Product colorBlack, Grey
Wall mountableYes
BluetoothNo
Security algorithms128-bit AES, 802.1x RADIUS
Networking standardsIEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Ethernet LAN (RJ-45) ports2
Voice codecsG.711, G.711a, G.722, G.729A, G.729ab, iLBC
Volume controlDigital
Display diagonal5 \
Display resolution320 x 222 pixels
Display number of colorsMonochrome
Caller ID-
Lines quantity- lines
Phonebook capacity- entries
Storage temperature (T-T)-10 - 60 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Number of handles included1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth203.2 mm
Width266.7 mm
Height152.4 mm
Weight1600 g

Related product manuals