EasyManuals Logo

Cisco 7962G User Manual

Cisco 7962G
110 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #54 background imageLoading...
Page #54 background image
8 OL-22333-01
Tips
Your phone may play an audible indicator to alert you when a call is ringing on the monitored
line (BLF Pickup only).
BLF Pickup answers the oldest ringing call first, if the line that you are monitoring has more than
one ringing call.
Making and Receiving Secure Calls
Depending on how your system administrator configured your phone system, your phone may support
making and receiving secure calls.
Your phone can support these types of calls:
Authenticated call—The identities of the phones participating in the call have been verified.
Encrypted call—The phone is receiving and transmitting encrypted audio (your conversation)
within the Cisco Unified CM network. Encrypted calls are authenticated.
Protected call—The phone is a secure (encrypted and trusted) device on the Unified CM server and
is configured as a “Protected Device” in Unified CM Administration.
If “Play Secure Indication Tone” is enabled (True) in Unified CM Administration, the protected
phone plays a secure or nonsecure indication tone at the beginning of the call:
See the state of a
speed-dial line
Look for one of these BLF indicators next to the line number:
+ Line is in-use.
+ Line is idle.
+ Line is in Do Not Disturb state.
+ (flashing)—Line is ringing (BLF Pickup only).
BLF indicator unavailable for this line.
Use BLF Pickup to
answer a call
ringing on a
coworker’s phone
Press the BLF Pickup button while the line is ringing.
The call is redirected to the next available line on your phone. If you want to
specify a line, first press a line button and then press the BLF button.
If your phone supports auto-pickup, the call connects automatically. Otherwise,
the call rings on your phone for you to answer.
Note
If you press the BLF Pickup button when the monitored line is not ringing,
your phone will speed dial the line number.
If you want to... Then...

Table of Contents

Other manuals for Cisco 7962G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 7962G and is the answer not in the manual?

Cisco 7962G Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Case materialABS
Product colorBlack, Grey
Wall mountableYes
BluetoothNo
Security algorithms128-bit AES, 802.1x RADIUS
Networking standardsIEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Ethernet LAN (RJ-45) ports2
Voice codecsG.711, G.711a, G.722, G.729A, G.729ab, iLBC
Volume controlDigital
Display diagonal5 \
Display resolution320 x 222 pixels
Display number of colorsMonochrome
Caller ID-
Lines quantity- lines
Phonebook capacity- entries
Storage temperature (T-T)-10 - 60 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Number of handles included1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth203.2 mm
Width266.7 mm
Height152.4 mm
Weight1600 g

Related product manuals