Cisco 7962G User Manual

Basic Call Handling
Cisco Unified IP Phone User Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP) 13
• When you switch an in-progress call from your mobile phone to Cisco Unified devices that share
the same line (Session Handoff), the Call Forward feature is disabled on the Cisco Unified devices.
The Call Forward feature returns when the call ends.
Using Do Not Disturb
You can use the Do Not Disturb (DND) feature to turn off only the ringer on your phone or to turn
off all audible and visual notifications of incoming calls. Your system administrator enables DND for
your phone.
When DND and Call Forward All are both enabled on your phone, calls are forwarded and the caller
does not hear a busy tone.
DND interaction with other types of calls includes:
• DND does not affect intercom calls or non-intercom priority calls.
• If both DND and AutoAnswer are enabled, only intercom calls will be answered automatically.
• When you switch an in-progress call from your mobile phone to Cisco Unified devices that share
the same line (Session Handoff), the DND feature is disabled on the Cisco Unified devices. The
DND feature returns when the call ends.
If you want to... Then...
Turn on DND Press DND or Do Not Disturb .
“Do Not Disturb” displays on the phone, the DND lights, and the ring tone
is turned off.
Turn off DND Press DND or
Do Not Disturb .
Customize DND
settings
If your system administrator configured DND settings to appear on the User
Options page, follow these steps:
1. Log in to your User Options web pages. See Accessing Your User Options
Web Pages, page 1.
2. From the drop-down menu, choose User Options > Device.
3. Set the following options:
– Do Not Disturb—Set to enable/disable DND.
– DND Option—Choose either Call Reject (to turn off all audible and
visual notifications) or Ringer Off (to turn off only the ringer).
– DND Incoming Call Alert (applies to either DND option set)—Set the
alert to beep only, flash only, disable the alert, or choose “None” (to
use the “Alert” setting configured by your system administrator).

Cisco 7962G Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Case material	ABS
Product color	Black, Grey
Wall mountable	Yes
Bluetooth	No
Security algorithms	128-bit AES, 802.1x RADIUS
Networking standards	IEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Ethernet LAN (RJ-45) ports	2
Voice codecs	G.711, G.711a, G.722, G.729A, G.729ab, iLBC
Volume control	Digital
Display diagonal	5 \
Display resolution	320 x 222 pixels
Display number of colors	Monochrome
Caller ID	-
Lines quantity	- lines
Phonebook capacity	- entries
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	203.2 mm
Width	266.7 mm
Height	152.4 mm
Weight	1600 g