Cisco 7962G User Manual (English)

Other manuals for Cisco 7962G

User Guide110 pages

User Manual92 pages

Specifications5 pages

Quick Reference Guide2 pages

Questions and Answers:

C
Christopher Howard MDAug 19, 2025
Why can't I hear a dial tone or complete a call on my Cisco IP Phone?
- R
  Ryan NguyenAug 19, 2025
  If you cannot hear a dial tone or complete a call on your Cisco IP Phone, make sure that you have logged into the Extension Mobility service. Also, if you are using an SCCP phone, ensure that you enter a client matter code (CMC) or forced authorization code (FAC) after dialing a number. Your inability to complete a call might also be due to time-of-day restrictions set on your phone, preventing you from using certain features during specific hours.
C
Christina NicholsAug 21, 2025
How to fix Cisco IP Phone when it is unable to obtain IP address?
- S
  shelley07Aug 21, 2025
  If the Cisco Unified IP Phone is unable to obtain an IP address, make sure that the network or VLAN to which the phone is connected has access to the DHCP server, and make sure that the switch port is enabled.
S
Scott EdwardsAug 25, 2025
How to adjust the screen display if it is too light or too dark on Cisco 7962G?
- S
  Shawn MarksAug 25, 2025
  To adjust the contrast on Cisco Unified IP Phones 7961G, 7961G-GE, 7941G, and 7941G-GE: 1. Choose . 2. Press 1, 3 on the keypad. 3. Press until you can see the phone screen display. 4. Press Save. For Cisco Unified IP Phones 7962G and 7942G: 1. Choose . 2. Press 1, 4 on the keypad. 3. Press until you can see the phone screen display. 4. Press Save.
T
Tara WintersAug 26, 2025
What to do if the softkey I want to use does not appear on my Cisco 7962G IP Phone?
- C
  Carolyn NicholsonAug 26, 2025
  If the softkey that you want to use does not appear on your Cisco IP Phone, try pressing the 'more' button to reveal additional softkeys. You might also need to change the line state, for example, by going off-hook or having a connected call. It is also possible that your phone is not configured to support the feature associated with that softkey.
C
colleenmorganAug 28, 2025
Why does Barge fail and result in a fast busy tone on my Cisco 7962G IP Phone?
- M
  Madison JonesAug 28, 2025
  If Barge fails and results in a fast busy tone when using your Cisco IP Phone, it may be because you cannot barge an encrypted call if the phone you are using is not configured for encryption.
S
Scott JohnsonAug 30, 2025
Why does Cisco CallBack fail?
- R
  Richard SandersAug 30, 2025
  Cisco CallBack may fail if the other party has call forwarding enabled.
C
Chad HartSep 1, 2025
What to do if Join fails on my Cisco 7962G?
- E
  Elizabeth MeyerSep 1, 2025
  If Join fails on your Cisco IP Phone (SCCP phones only), ensure that you have selected at least one call in addition to the active call, as Join requires multiple selected calls. Also, verify that the selected calls are on the same line. If necessary, transfer calls to one line before joining them.
K
Kyle BrownSep 3, 2025
Why is the Settings button unresponsive on my Cisco 7962G IP Phone?
- L
  Lisa CollinsSep 3, 2025
  The Settings button on your Cisco IP Phone might be unresponsive because your system administrator has disabled it on your phone.
J
Joseph EdwardsSep 5, 2025
How to fix Cisco 7962G IP Phone when I cannot hear a dial tone?
- J
  jenniferthomasSep 5, 2025
  If you cannot hear a dial tone or complete a call on your Cisco IP Phone, ensure you are logged into the Extension Mobility service. Also, if you are using an SCCP phone, you may need to enter a client matter code (CMC) or forced authorization code (FAC) after dialing. Finally, check if your phone has time-of-day restrictions that prevent usage during certain hours.

Cisco 7962G Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Case material	ABS
Product color	Black, Grey
Wall mountable	Yes
Bluetooth	No
Security algorithms	128-bit AES, 802.1x RADIUS
Networking standards	IEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Ethernet LAN (RJ-45) ports	2
Voice codecs	G.711, G.711a, G.722, G.729A, G.729ab, iLBC
Volume control	Digital
Display diagonal	5 \
Display resolution	320 x 222 pixels
Display number of colors	Monochrome
Caller ID	-
Lines quantity	- lines
Phonebook capacity	- entries
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Number of handles included	1 pc(s)