Cisco 7962G Administration Guide

4-21
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 7.1
OL-18913-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
Related Topics
• Displaying a Configuration Menu, page 4-2
• Device Configuration Menu, page 4-16
HTTP Configuration Menu
The HTTP Configuration menu displays the URLs of servers from which the phone obtains a variety of
information. This menu also displays information about the idle display on the phone.
Note Cisco Unified IP Phones do not support URLs with IPv6 addresses in the URL. This includes hostname
which maps to a IPv6 address for directories, services, messages, and information URLs. If you support
the phone’s usage of URLs, you must configure the phone and the servers that provide URL services
with IPv4 addresses.
Table 4-11 describes the options on the HTTP Configuration menu.
Call Waiting Preferences Displays a sub-menu that indicates whether call
waiting is enabled (Yes) or disabled (No) for each
line.
Use Cisco Unified Communications
Manager Administration to modify.
Call Hold Ringback Indicates whether the call hold ringback feature is
enabled (Yes) or disabled (No) for the phone.
From Cisco Unified Communications
Manager Administration, choose Device >
Device Settings > SIP Profile.
Stutter Msg Waiting Indicates whether stutter message waiting is
enabled (Yes) or disabled (No) for the phone.
From Cisco Unified Communications
Manager Administration, choose Device >
Device Settings > SIP Profile.
Call Logs BLF Enabled Indicates whether BLF for call logs is enabled
(Yes) or disabled (No) for the phone.
Use Cisco Unified Communications
Manager Administration to modify.
Auto Answer Preferences Displays a sub-menu that indicates whether auto
answer is enabled (Yes) or disabled (No) for the
each line.
From Cisco Unified Communications
Manager Administration, choose Call
Routing > Directory Number.
Speed Dials Displays a sub-menu that displays the lines
available on the phone. Select a line to see the
speed dial label and number assigned to that line.
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Add a New Speed Dial.
Table 4-10 Call Preferences Menu Options (continued)
Option Description To Change
Table 4-11 HTTP Configuration Menu Options
Option Description To Change
Directories URL URL of the server from which the phone
obtains directory information.
From Cisco Unified Communications Manager
Administration, choose Device > Phone > Phone
Configuration.
Services URL URL of the server from which the phone
obtains Cisco Unified IP Phone services.
From Cisco Unified Communications Manager
Administration, choose Device > Phone > Phone
Configuration.

Cisco 7962G Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Case material	ABS
Product color	Black, Grey
Wall mountable	Yes
Bluetooth	No
Security algorithms	128-bit AES, 802.1x RADIUS
Networking standards	IEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Ethernet LAN (RJ-45) ports	2
Voice codecs	G.711, G.711a, G.722, G.729A, G.729ab, iLBC
Volume control	Digital
Display diagonal	5 \
Display resolution	320 x 222 pixels
Display number of colors	Monochrome
Caller ID	-
Lines quantity	- lines
Phonebook capacity	- entries
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	203.2 mm
Width	266.7 mm
Height	152.4 mm
Weight	1600 g