B-1
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 7.1
OL-18913-01
APPENDIX
B
Feature Support by Protocol for Cisco Unified IP
Phones 7962G, 7942G, 7961G, 7961G-GE, 7941G,
and 7941G-GE
This appendix provides information about feature support for the Cisco Unified IP Phones 7962G,
7942G, 7961G, 7961G-GE, 7941G, and 7941G-GE using the SCCP or SIP protocol with
Cisco Unified Communications Manager Release 7.1.
Table B-1 provides a high-level overview of calling features and their support by protocol. This table
focuses primarily on end-user calling features and is not intended to represent a comprehensive listing
of all available phone features. For details about user interface differences and feature use, refer to the
Cisco Unified IP Phone Guide.
This guide is available at this URL:
http://www.cisco.com/en/US/products/hw/phones/ps379/tsd_products_support_series_home.html
The specific sections that describe the features in the phone guide are referenced in Table B-1.
Table B-1 Cisco Unified IP Phones 7962G, 7942G, 7961G, 7961G-GE, 7941G, and 7941G-GE Feature Support by
Protocol
Features
Cisco Unified IP Phones 7962G, 7942G,
7961G, 7961G-GE, 7941G, and 7941G-GE
For More InformationSCCP SIP
Calling Features
Abbreviated Dialing Supported Supported “Basic Call Handling—Placing a Call: Additional
Options”
Audible Message Waiting
Indicator
Supported Supported “Accessing Voice Messages”
Auto Answer Supported Supported “Using a Handset, Headset, and
Speakerphone—Using Auto Answer”
Auto Dial Supported Supported “Basic Call Handling—Placing a Call: Basic
Options”
Barge (and cBarge) Supported Supported “Advanced Call Handling—Using a Shared Line”
Busy Lamp Field (BLF) Supported Supported “Advanced Call Handling—Using BLF to
Determine a Line State”
To Next Page
Loading...
Need help?
General
Weight and Dimensions
