1-13
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 7.1
OL-18913-01
Chapter 1 An Overview of the Cisco Unified IP Phone
Understanding Security Features for Cisco Unified IP Phones
Overview of Supported Security Features
Table 1-4 provides an overview of the security features that the Cisco Unified IP Phones 7962G, 7942G,
7961G, 7961G-GE, 7941G, and 7941G-GE support. For more information about these features and
about Cisco Unified Communications Manager and Cisco Unified IP Phone security, refer to Cisco
Unified Communications Manager Security Guide.
For information about current security settings on a phone, choose Settings > Security Configuration
and choose Settings > Device Configuration > Security Configuration. For more information, see the
“Security Configuration Menu” section on page 4-29.
Note Most security features are available only if a certificate trust list (CTL) is installed on the phone. For
more information about the CTL, refer to “Configuring the Cisco CTL Client” chapter in Cisco Unified
Communications Manager Security Guide.
Troubleshooting
• See the “Troubleshooting Cisco Unified IP
Phone Security” section on page 9-8
• Refer to the Troubleshooting Guide for Cisco
Unified Communications Manager
Deleting the CTL file from the phone See the “Resetting or Restoring the Cisco
Unified IP Phone” section on page 9-13
Resetting or restoring the phone See the “Resetting or Restoring the Cisco
Unified IP Phone” section on page 9-13
802.1X Authentication for Cisco Unified IP
Phones
See these sections:
• “Supporting 802.1X Authentication on Cisco
Unified IP Phones” section on page 1-19
• “Security Configuration Menu” section on
page 4-29
• “Status Menu” section on page 7-2
• “Troubleshooting Cisco Unified IP Phone
Security” section on page 9-8
Table 1-3 Cisco Unified IP Phone and Cisco Unified Communications Manager Security
Topics (continued)
Topic Reference
To Next Page
Loading...
Need help?
General
Weight and Dimensions
