Cisco 7962G Administration Guide

C-1
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 7.1
OL-18913-01
APPENDIX
C
Supporting International Users
Translated and localized versions of the Cisco Unified IP Phones are available in several languages. If
you are supporting Cisco Unified IP Phones in a non-English environment, refer to the following
sections to ensure that the phones are set up properly for your users:
• Adding Language Overlays to Phone Buttons, page C-1
• Installing the Cisco Unified Communications Manager Locale Installer, page C-1
• “Support for International Call Logging” section on page C-2
Adding Language Overlays to Phone Buttons
To support the needs of international users, the button labels on the Cisco Unified IP Phones exhibit
icons rather than text to indicate the purposes of the buttons. You can purchase language-specific text
overlays to add to a phone. To order these language-specific overlays, go to this website:
http://www.overlaypro.com/cisco_systems?b=1
Note Phone overlays are available only for languages in which the Cisco Unified IP Phone software has been
localized. All languages may not be immediately available, so continue to check the website for updates.
Installing the Cisco Unified Communications Manager Locale
Installer
If you are using Cisco Unified IP Phones in a locale other than English (United States), you must install
the locale-specific version of the Cisco Unified Communications Manager Locale Installer on every
Cisco Unified Communications Manager server in the cluster. Installing the locale installer ensures that
you have the latest translated text, user and network locales, and country-specific phone tones available
for the Cisco Unified IP Phones. You can find locale-specific versions of the Cisco Unified
Communications Manager Locale Installer at
http://www.cisco.com/kobayashi/sw-center/telephony/callmgr/locale-installer.shtml.
For more information, refer to the “Locale Installation” section in the Cisco Unified Communications
Operating System Administration Guide.

Cisco 7962G Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Case material	ABS
Product color	Black, Grey
Wall mountable	Yes
Bluetooth	No
Security algorithms	128-bit AES, 802.1x RADIUS
Networking standards	IEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Ethernet LAN (RJ-45) ports	2
Voice codecs	G.711, G.711a, G.722, G.729A, G.729ab, iLBC
Volume control	Digital
Display diagonal	5 \
Display resolution	320 x 222 pixels
Display number of colors	Monochrome
Caller ID	-
Lines quantity	- lines
Phonebook capacity	- entries
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	203.2 mm
Width	266.7 mm
Height	152.4 mm
Weight	1600 g