Cisco 7962G Administration Guide

8-4
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 7.1
OL-18913-01
Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Device Information
Device Information
The Device Information area on a phone’s web page displays device settings and related information for
the phone. Table 8-1 describes these items.
To display the Device Information area, access the web page for the phone as described in the “Accessing
the Web Page for a Phone” section on page 8-2, and then click the Device Information hyperlink.
Table 8-1 Device Information Area Items
Item Description
MAC Address Media Access Control (MAC) address of the phone
Host Name Unique, fixed name that is automatically assigned to the phone based on its MAC address
Phone DN Directory number assigned to the phone
App Load ID Identifier of the firmware running on the phone
Boot Load ID Identifier of the factory-installed load running on the phone
Version Version of the firmware running on the phone
Expansion Module 1 Phone load ID for the first Cisco Unified IP Phone Expansion Module 7914, if connected
to the phone
Expansion Module 2 Phone load ID for the second Cisco Unified IP Phone Expansion Module 7914, if
connected to the phone
Hardware Revision Revision value of the phone hardware
Serial Number Serial number of the phone
Model Number Model number of the phone
Message Waiting Indicates if there is a voice message waiting on any line for this phone
UDI Displays the following Cisco Unique Device Identifier (UDI) information about the phone:
• Device Type—Indicates hardware type. For example, phone displays for all phone
models
• Device Description—Displays the name of the phone associated with the indicated
model type
• Product Identifier—Specifies the phone model
• Version Identifier
1
—Represents the hardware version of the phone
Note The Version Identifier field might display a blank screen if the user is using an older
model Cisco Unified IP Phone, because the hardware does not provide this
information.
• Serial Number—Displays the phone’s unique serial number
1.
Time Time obtained from the Date/Time Group in Cisco Unified Communications Manager to
which the phone belongs
Time Zone Time zone obtained from the Date/Time Group in Cisco Unified Communications Manager
to which the phone belongs
Date Date obtained from the Date/Time Group in Cisco Unified Communications Manager to
which the phone belongs

Cisco 7962G Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Case material	ABS
Product color	Black, Grey
Wall mountable	Yes
Bluetooth	No
Security algorithms	128-bit AES, 802.1x RADIUS
Networking standards	IEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Ethernet LAN (RJ-45) ports	2
Voice codecs	G.711, G.711a, G.722, G.729A, G.729ab, iLBC
Volume control	Digital
Display diagonal	5 \
Display resolution	320 x 222 pixels
Display number of colors	Monochrome
Caller ID	-
Lines quantity	- lines
Phonebook capacity	- entries
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	203.2 mm
Width	266.7 mm
Height	152.4 mm
Weight	1600 g