Cisco 7962G Administration Guide

CHAPTER
5-1
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 7.1
OL-18913-01
5
Configuring Features, Templates, Services, and
Users
After you install Cisco Unified IP Phones in your network, configure their network settings, and add
them to Cisco Unified Communications Manager, you must use Cisco Unified Communications
Manager Administration to configure telephony features, optionally modify phone templates, set up
services, and assign users.
This chapter provides an overview of these configuration and setup procedures. Cisco Unified
Communications Manager documentation provides detailed instructions for these procedures.
For suggestions about how to provide users with information about features, and what information to
provide, see Appendix A, “Providing Information to Users Via a Website.”
For information about setting up phones in non-English environments, see Appendix C, “Supporting
International Users.”
This chapter includes following topics:
• Telephony Features Available for the Cisco Unified IP Phone, page 5-1
• Configuring Corporate and Personal Directories, page 5-16
• Modifying Phone Button Templates, page 5-17
• Configuring Softkey Templates, page 5-20
• Setting Up Services, page 5-20
• Adding Users to Cisco Unified Communications Manager, page 5-21
• Managing the User Options Web Pages, page 5-21
Telephony Features Available for the Cisco Unified IP Phone
After you add Cisco Unified IP Phones to Cisco Unified Communications Manager, you can add
functionality to the phones. Table 5-1 includes a list of supported telephony features, many of which you
can configure using Cisco Unified Communications Manager Administration. The Reference column
lists Cisco Unified Communications Manager and other documentation that contains configuration
procedures and related information.
For information about using most of these features on the phone, refer to Cisco Unified IP Phones
7962G, 7942G, 7961G, 7961G-GE, 7941G, and 7941G-GE Phone Guide and the Cisco
Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE Phone Guide. For a comprehensive listing
of features on the phone, refer to Cisco Unified IP Phone Features A–Z.

Cisco 7962G Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Case material	ABS
Product color	Black, Grey
Wall mountable	Yes
Bluetooth	No
Security algorithms	128-bit AES, 802.1x RADIUS
Networking standards	IEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Ethernet LAN (RJ-45) ports	2
Voice codecs	G.711, G.711a, G.722, G.729A, G.729ab, iLBC
Volume control	Digital
Display diagonal	5 \
Display resolution	320 x 222 pixels
Display number of colors	Monochrome
Caller ID	-
Lines quantity	- lines
Phonebook capacity	- entries
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	203.2 mm
Width	266.7 mm
Height	152.4 mm
Weight	1600 g