EasyManuals Logo

Cisco 7962G Administration Guide

Cisco 7962G
235 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #179 background imageLoading...
Page #179 background image
CHAPTER
9-1
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 7.1
OL-18913-01
9
Troubleshooting and Maintenance
This chapter provides information that can assist you in troubleshooting problems with your Cisco
Unified IP Phone or with your IP telephony network. It also explains how to clean and maintain your
phone.
For additional troubleshooting information, refer to the Using the 79xx Status Information For
Troubleshooting tech note. That document is available to registered Cisco.com users at this URL:
http://www.cisco.com/warp/customer/788/AVVID/telecaster_trouble.html
If you need additional assistance to resolve an issue, see the “Obtaining Documentation, Obtaining
Support, and Security Guidelines” section on page xi.
This chapter includes these topics:
Resolving Startup Problems, page 9-1
Cisco Unified IP Phone Resets Unexpectedly, page 9-6
Troubleshooting Cisco Unified IP Phone Security, page 9-8
General Troubleshooting Tips, page 9-10
General Troubleshooting Tips for the Cisco Unified IP Phone Expansion Module, page 9-13
Resetting or Restoring the Cisco Unified IP Phone, page 9-13
Using the Quality Report Tool, page 9-15
Monitoring the Voice Quality of Calls, page 9-15
Where to Go for More Troubleshooting Information, page 9-17
Cleaning the Cisco Unified IP Phone, page 9-18
Resolving Startup Problems
After installing a Cisco Unified IP Phone into your network and adding it to Cisco Unified
Communications Manager, the phone should start up as described in the “Verifying the Phone Startup
Process” section on page 3-12. If the phone does not start up properly, see the following sections for
troubleshooting information:
Symptom: The Cisco Unified IP Phone Does Not Go Through its Normal Startup Process, page 9-2
Symptom: The Cisco Unified IP Phone Does Not Register with Cisco Unified Communications
Manager, page 9-2
Symptom: Cisco Unified IP Phone Unable to Obtain IP Address, page 9-6

Table of Contents

Other manuals for Cisco 7962G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 7962G and is the answer not in the manual?

Cisco 7962G Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Case materialABS
Product colorBlack, Grey
Wall mountableYes
BluetoothNo
Security algorithms128-bit AES, 802.1x RADIUS
Networking standardsIEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Ethernet LAN (RJ-45) ports2
Voice codecsG.711, G.711a, G.722, G.729A, G.729ab, iLBC
Volume controlDigital
Display diagonal5 \
Display resolution320 x 222 pixels
Display number of colorsMonochrome
Caller ID-
Lines quantity- lines
Phonebook capacity- entries
Storage temperature (T-T)-10 - 60 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Number of handles included1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth203.2 mm
Width266.7 mm
Height152.4 mm
Weight1600 g

Related product manuals