C-2
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 7.1
OL-18913-01
Appendix C Supporting International Users
Support for International Call Logging
Note All languages may not be immediately available, so continue to check the website for updates.
Support for International Call Logging
If your phone system is configured for international call logging, the call logs, redial, or call directory
entries may display a “+” symbol to represent the international escape code for your location. Depending
on the configuration for your phone system, the “+” may be replaced with the correct international
dialing code, or you may need to edit the number before dialing to manually replace the “+” with the
international escape code for your location. In addition, while the call log or directory entry may display
the full international number for the received call, the phone display may show the shortened local
version of the number, without international or country codes.
To Next Page
Loading...
