Cisco 7965G Administration Guide

8-6
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.0
OL-12650-01
Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Network Configuration
CallManager 1–5 Host names or IP addresses, in prioritized order, of the
Cisco
Unified Communications Manager servers with
which the phone can register. An item can also show
the IP address of an SRST router that is capable of
providing limited Cisco
Unified Communications
Manager functionality, if such a router is available.
For an available server, an item will show the
Cisco
Unified Communications Manager server IP
address and one of the following states:
• Active—Cisco Unified Communications Manager
server from which the phone is currently receiving
call-processing services.
• Standby—Cisco Unified Communications
Manager server to which the phone switches if the
current server becomes unavailable.
• Blank—No current connection to this
Cisco
Unified Communications Manager server.
An option may also include the Survivable Remote
Site Telephony (SRST) designation, which indicates
an SRST router capable of providing
Cisco
Unified Communications Manager functionality
with a limited feature set. This router assumes control
of call processing if all other Cisco
Unified
Communications Manager servers become
unreachable. The SRST Cisco
Unified
Communications Manager always appears last in the
list of servers, even if it is active. You configure the
SRST router address in the Device Pool section in
Cisco
Unified Communications Manager.
Information URL URL of the help text that appears on the phone.
Directories URL URL of the server from which the phone obtains
directory information.
Messages URL URL of the server from which the phone obtains
message services.
Services URL URL of the server from which the phone obtains
Cisco
Unified IP Phone services.
DHCP Enabled Indicates whether DHCP is being used by the phone.
DHCP Address
Released
Indicates the setting of the DHCP Address Released
option on the phone’s Network Configuration menu.
Alternate TFTP Indicates whether the phone is using an alternative
TFTP server.
Idle URL URL that the phone displays when the phone has not
been used for the time specified by Idle URL Time and
no menu is open.
Table 8-2 Network Configuration Area Items (continued)
Item Description

Cisco 7965G Specifications

General

Protocol Support	SIP, SCCP
Weight	3.5 lbs (1.6 kg)
Ethernet	10/100 Mbps
Power	IEEE 802.3af Power over Ethernet (PoE)
Expansion Module Support	Supports up to two Cisco Unified IP Phone Expansion Modules
Speakerphone	Full-duplex speakerphone
Lines	6 lines
Codecs	G.711, G.729a, iLBC