Cisco 7965G Administration Guide

5-2
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.0
OL-12650-01
Chapter 5 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Phone
Telephony Features Available for the Phone
After you add Cisco Unified IP Phones to Cisco Unified Communications Manager, you can add
functionality to the phones.
Table 5-1 includes a list of supported telephony features, many of which you
can configure using Cisco Unified Communications Manager Administration. The Configuration
Reference column lists Cisco
Unified Communications Manager documentation that contains
configuration procedures and related information.
For information about using most of these features on the phone, refer to Cisco Unified IP Phone 7965G
and 7945G Guide. For a comprehensive listing of features on the phone, refer to Cisco Unified IP Phone
Features A–Z.
Note Cisco Unified Communications Manager Administration also provides several service parameters that
you can use to configure various telephony functions. For more information about service parameters
and the functions that they control, refer to Cisco Unified
Communications Manager Administration
Guide.
Table 5-1 Telephony Features for the Cisco Unified IP Phone
Feature Description Configuration Reference
Abbreviated dialing Allows users to speed dial a phone number by
entering an assigned index code (1-99) on the
phone keypad.
Users assign index codes from the User
Options web pages.
For more information, refer to:
• Cisco Unified
Communications Manager
Administration Guide,
“Cisco Unified IP Phone
Configuration” chapter.
• Cisco Unified
Communications Manager
System Guide, “Cisco
Unified IP Phone” chapter.
Anonymous Call
Block
(SIP phones only)
Allows a user to reject calls from anonymous
callers.
Cisco Unified Communications
Manager Administration Guide,
“SIP Profile Configuration”
chapter.
Message Waiting Defines directory numbers for
message-waiting on and message-waiting off
indicator. A directly connected
voice-messaging system uses the specified
directory number to set or to clear a
message-waiting indication for a particular
Cisco Unified IP Phone.
For more information, refer to:
• Cisco Unified
Communications Manager
Administration Guide,
“Message Waiting
Configuration” chapter.
• Cisco Unified
Communications Manager
System Guide, “Voice Mail
Connectivity to Cisco
Unified Communications
Manager” chapter.

Cisco 7965G Specifications

General

Protocol Support	SIP, SCCP
Weight	3.5 lbs (1.6 kg)
Ethernet	10/100 Mbps
Power	IEEE 802.3af Power over Ethernet (PoE)
Expansion Module Support	Supports up to two Cisco Unified IP Phone Expansion Modules
Speakerphone	Full-duplex speakerphone
Lines	6 lines
Codecs	G.711, G.729a, iLBC