4-15
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.0
OL-12650-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
Related Topics
• Displaying a Configuration Menu, page 4-2
• Device Configuration Menu, page 4-12
End Media Port Displays the end Real-Time Transport
Protocol (RTP) range for media.
From Cisco Unified Communications
Manager Administration, choose
Device > Device
Settings > SIP
Profile.
Backup Proxy Displays the IP address of the backup
proxy server or gateway. This value
will always be set to
USECommunications Manager.
Display only—cannot configure.
Backup Proxy Port Displays the port number of the backup
proxy server or gateway. This value
will always be set to 5060.
Display only—cannot configure.
Emergency Proxy Displays the IP address of the
emergency proxy server or gateway.
This value will always be set to
USECommunications Manager.
Display only—cannot configure.
Emergency Proxy
Port
Displays the port number of the
emergency proxy server or gateway.
This value will always be set to 5060.
Display only—cannot configure.
Outbound Proxy Displays the IP address of the outbound
proxy server. This value will always be
set to USECommunications Manager.
Display only—cannot configure.
Outbound Proxy
Port
Displays the port number of the
outbound proxy server. This value will
always be set to 5060.
Display only—cannot configure.
NAT Enabled Displays if Network Address
Translation (NAT) is enabled. This
value will always be set to false.
Display only—cannot configure.
NAT Address Displays the WAN IP address of the
NAT or firewall server. This value will
always be set to null.
Display only—cannot configure.
Call Statistics Displays if call statistics are enabled on
the phone.
From Cisco Unified Communications
Manager Administration, choose
Device > Device
Settings > SIP
Profile.
Table 4-5 SIP General Configuration Menu Options (continued)
Option Description To Change