4-23
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.0
OL-12650-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
Recording Tone
Local Volume
Indicates the loudness setting for the
beep tone that is received by the party
whose phone has the Recording Tone
option enabled.
This setting applies for each listening
device (handset, speakerphone,
headset).
Range: 0 percent (no tone) to 100
percent (same level as current volume
setting on the phone).
Default: 100
See also: Recording Tone
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone
Configuration.
Recording Tone
Remote Volume
Indicates the loudness setting for the
beep tone that the remote party
receives. The remote party is the party
who is on a call with the party whose
phone has the Recording Tone option
enabled.
Range: 0 percent to 100 percent. (0
percent is –66 dBM and 100 percent is
–3 dBM.)
Default: 84 percent (–10dBM)
See also: Recording Tone
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone
Configuration.
Recording Tone
Duration
Indicates the length of time in
milliseconds that the beep tone plays.
If the value you configure here is less
than one third the interval, then this
value overrides the default provided by
the Network Locale.
Range: 0 to 3000
Note For some Network Locales that
use a complex cadence, this
setting applies only to the first
beep tone.
See also: Recording Tone
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone
Configuration.
Table 4-12 Media Configuration Menu Options (continued)
Option Description To Change
To Next Page
Loading...
Need help?
General
