CHAPTER
CISCO CONFIDENTIAL - First Draft
1-1
Cisco Aironet 1300 Series Bridge Hardware Installation Guide
OL-5048-01
1
Overview
The Cisco Aironet 1300 Series Bridget (hereafter called the bridge) is a wireless device designed for
building-to-building wireless connectivity. Operating in the 2.4-GHz band (2.400 to 2.497 GHz), using
the IEEE 802.11g standard, the bridge delivers 1 to 54 Mbps data rates without the need for a license.
The bridge is a self-contained unit designed for outdoor installations, providing differing antenna gains
as well as coverage patterns. It supports point-to-point and multipoint bridging configurations. When
placed in access point mode, the bridge supports wireless IEEE 802.11b and
IEEE 802.11g client devices.
The bridge uses a browser-based management system, but you can also configure the bridge using Cisco
IOS commands or Simple Network Management Protocol (SNMP).
This chapter provides information on the following topics:
• Key Features, page 1-2
• Network Configuration Examples, page 1-6
To Next Page
Loading...
