Cisco Aironet 1300 Series - Point-to-Multipoint Configuration; Workgroup Bridge Configuration

CISCO CONFIDENTIAL - First Draft
1-7
Cisco Aironet 1300 Series Bridge Hardware Installation Guide
OL-5048-01
Chapter 1 Overview
Network Configuration Examples
Figure 1-5 Port Aggregation or Redundancy Bridge Configuration
Point-to-Multipoint Configuration
The point-to-multipoint configuration (Figure 1-6) connects the main LAN network to multiple remote
LAN networks.
Figure 1-6 Point-to-Multipoint Bridge Configuration
Workgroup Bridge Configuration
The workgroup bridge configuration (Figure 1-7) connects remote workstations to an access point.
Figure 1-7 Workgroup Bridge Configuration
88834
Bridge Bridge
Bridge Bridge
88835
Bridge
Bridge
Bridge