Cisco Aironet 1300 Series - Cisco IOS Release 12.3(4)JA and Later

CISCO CONFIDENTIAL - First Draft
Contents
iv
Cisco Aironet 1300 Series Bridge Hardware Installation Guide
OL-5048-01
CHAPTER 2 Installation Overview 2-1
Warnings 2-2
Safety Information 2-3
FCC Safety Compliance Statement 2-3
Safety Precautions 2-3
Typical Bridge Installation Components 2-4
Installation Guidelines 2-5
Site Surveys 2-5
Unpacking the Bridge 2-5
Package Contents 2-6
Before Beginning the Installation 2-6
Installation Summary 2-8
CHAPTER 3 Mounting and Alignment Overview 3-1
Mounting the Bridge 3-2
Mounting Hardware 3-2
Multi-function Mount 3-2
Bridge Bracket 3-3
Mast Bracket 3-3
Bridge LEDs 3-3
Aligning the Antenna Using RSSI LED Indications 3-5
CHAPTER 4 Stacking Bridges 4-1
Overview 4-2
Choosing a Second Mounting Location 4-2
Installing the Stacked Bridges 4-2
Verifying Isolation - TBD 4-3
CHAPTER 5 Configuring the Bridge for the First Time 5-1
Before You Start 5-2
Resetting the Bridge to Default Settings 5-2
Obtaining and Assigning an IP Address 5-3
Connecting to the Bridge Locally 5-3
Assigning Basic Settings 5-4
Default Settings on the Express Setup Page 5-8