Cisco Aironet 1300 Series - Checking the LEDs

CISCO CONFIDENTIAL - First Draft
Contents
vi
Cisco Aironet 1300 Series Bridge Hardware Installation Guide
OL-5048-01
CHAPTER 8 Troubleshooting 8-1
Checking the Bridge LEDs 8-2
Bridge Normal Mode LED Indications 8-2
Power Injector 8-4
Checking Power 8-5
Checking Basic Configuration Settings 8-5
SSID 8-5
Security Settings 8-5
Antenna Alignment 8-5
Resetting to the Default Configuration - TBD 8-6
Using the Serial Console Port -TBD 8-6
Using the Web Browser Interface - TBD 8-6
Reloading the Bridge Image - TBD 8-7
Using the Serial Console Port - TBD 8-7
Web Browser Interface - TBD 8-8
Browser HTTP Interface 8-8
Browser TFTP Interface 8-8
Obtaining the Bridge Image File 8-9
Obtaining the TFTP Server Software 8-9
APPENDIX A Translated Safety Warnings A-1
Installation Warning A-2
Installation and Grounding Warning A-2
Ground Conductor Warning A-4
Lightning Activity Warning A-6
Antenna Installation Warning A-7
Explosive Device Proximity Warning A-8
Circuit Breaker (15A) Warning A-9
APPENDIX B Declarations of Conformity and Regulatory Information B-1
Manufacturers Federal Communication Commission Declaration of Conformity Statement B-2
Department of Communications—Canada B-3
Canadian Compliance Statement B-3
European Community, Switzerland, Norway, Iceland, and Liechtenstein B-3
Declaration of Conformity with Regard to the R&TTE Directive 1999/5/EC B-3
Declaration of Conformity for RF Exposure B-5