Cisco ASR 1001-HX - Page 116

CommentsLicense
Usage
Slot 5
or
Slot 7
Slot 4
or
Slot 6
ScenarioNo.
This is also
applicable if
10G SFP+ is
only in one of
the ports in a
port pair.
No LicenseSHUTSHUT10G SFP+ is on both ports of a port
pair (4 and 5; or 6 and 7) before
using the no shut command
2
10G LicenseNO_SHUTSHUT
10G LicenseSHUTNO_SHUT
10G LicenseNO_SHUTNO_SHUT
—
No LicenseSHUTSHUT1G SFP is on both ports of a port
pair (4 and 5; or 6 and 7) before
using the no shut command
3
1G LicenseNO_SHUTSHUT
1G LicenseSHUTNO_SHUT
1G LicenseNO_SHUTNO_SHUT
This is also
applicable
when:
1G SFP is
present on
port 4 and no
SFP is on port
5
or
1G SFP is
present on
port 6 and no
SFP is on port
7
No LicenseSHUTSHUTIn a port pair:
1G SFP is on port 4 and 10G SFP+
is on port 5 before using the no shut
command
or
1G SFP is on port 6 and 10G SFP+
is on port 7 before using the no shut
command
4
10G LicenseNO_SHUTSHUT
1G LicenseSHUTNO_SHUT
10G LicenseNO_SHUTNO_SHUT
This is also
applicable
when:
No SFP is on
port 4 and 1G
SFP is present
on port 5
No SFP is on
port 6 and 1G
SFP is present
on port 7
No LicenseSHUTSHUTIn a port pair:
10G SFP+ is on port 4 and 1G SFP
is on port 5 before using the no shut
command
or
10G SFP+ is on port 6 and 1G SFP
is on port 7 before using the no shut
command
5
1G LicenseNO_SHUTSHUT
10G LicenseSHUTNO_SHUT
10G LicenseNO_SHUTNO_SHUT
Cisco ASR 1001-HX Router and Cisco ASR 1002-HX Router Hardware Installation Guide
104
License Verification
Port Licensing for the Cisco ASR 1001-HX Router