Cisco ASR 1001-HX User Manual

Configuring a higher-level license automatically enables the lower-level licenses as Right to Use (RTU)
if the corresponding permanent licenses are not installed yet. For example, configuring 16-25g on the
Cisco ASR 1002-HX Router automatically enables 8g and 8-16g as RTU.
Note
For more information about the software-activated performance upgrade license, see the Software Activation
Configuration Guide.
Cisco ASR 1001-HX Router and Cisco ASR 1002-HX Router Hardware Installation Guide
110
License Verification
Configuring the Crypto Throughput Level

Cisco ASR 1001-HX Specifications

General

Form Factor	1 RU
Rack Mountable	Yes
Redundant Power Supply	Optional
Operating Temperature	32 to 104°F (0 to 40°C)
Memory	16 GB
Power Supply	Internal AC or DC
Humidity	5% to 95% non-condensing
Ports	Built-in 8 x 1GE and 4 x 10GE (SFP+)
Maximum NAT sessions	Up to 4 million