Cisco ATA 190 User Manual

4-2
Cisco ATA 190 Analog Telephone Adaptor Administration Guide for SIP (Version 1.0)
OL-31821-01
Chapter 4 Configuring the ATA 190
Telephony Features Available for the ATA 190
Call forward Allows users to redirect incoming calls to another number.
Call forward options include Call Forward All, Call
Forward Busy, and Call Forward No Answer.
For more information, refer to:
• Cisco Unified Communications
Manager Administration Guide,
Directory Number Configuration.
• Cisco Unified Communications
Manager System Guide,
Cisco
Unified IP Phones.
Call pickup Allows users to redirect a call that is ringing on another
phone within their pickup group to their phone.
You can configure an audio and/or visual alert for the
primary line on the phone. This alert notifies the users that
a call is ringing in their pickup group.
For more information, refer to the Cisco
Unified Communications Manager
Features and Services Guide, Call
Pickup.
Call waiting Indicates (and allows users to answer) an incoming call that
rings while on another call. Displays incoming call
information on the phone screen.
For more information, refer to the Cisco
Unified Communications System Guide,
Understanding Directory Numbers.
Caller ID Displays caller identification such as a phone number,
name, or other descriptive text on the phone screen.
For more information, refer to:
• Cisco Unified Communications
Manager Administration Guide,
Cisco Unified IP Phone
Configurations.
• Cisco Unified Communications
Manager System Guide,
Understanding Route Plans.
• Cisco Unified Communications
Manager Features and Services
Guide,
Call Display Restrictions.
• Cisco Unified Communications
Manager Administration Guide,
Directory Number Configuration.
Conference • Allows a user to talk simultaneously with multiple
parties by calling each participant individually.
Conference features include Adhoc Conference,
cBarge, and Meet–Me.
• Allows a non-initiator in a standard (ad hoc) conference
to add or remove participants.
For more information, refer to:
• Cisco Unified Communications
Manager System Guide,
Cisco Unified IP Phones.
• The service parameter, Advance
Adhoc Conference, (disabled by
default in Cisco Unified
Communications Manager
Administration) allows you to
enable these features.
Note Be sure to inform your users
whether these features are
activated.
Table 4-1 Telephony Features for the ATA 190 (continued)
Feature Description Configuration Reference

Cisco ATA 190 Specifications

General

Ports	2 FXS ports
Operating Temperature	32 to 104°F (0 to 40°C)
Network Interface	10/100BASE-T Ethernet
Protocol Support	SIP
Power Supply	5V DC
Voice Codecs	G.711a, G.711u, G.729a, G.729ab
Relative Humidity	10 to 90% noncondensing