6-3
Cisco ATA 190 Analog Telephone Adaptor Administration Guide for SIP (Version 1.0)
OL-31821-01
Chapter 6 Using SIP Supplementary Services
Common Supplementary Services
Group Call Pickup
Allows you to answer a call on a phone that is outside your call pickup group by:
• Using a group pickup number
• Dialing the ringing phone's number
Perform the following steps to use the group call pickup feature:
Procedure
Step 1 Pick up the phone handset.
Step 2 Press **4 > group ID > #.
Meet–Me Conference
This feature allows a user to host a Meet–Me conference in which other participants call a predetermined
number at a scheduled time. Perform the following steps to complete a meet–me conference:
Procedure
Step 1 Pick up the phone handset.
Step 2 Press **5 > room ID > #.
Privacy
This feature prevents users who share a line from adding themselves to a call and from viewing
information on their phone screens about the call of the other user. Perform the following steps to enable
or disable the privacy feature:
Procedure
Step 1 Pick up the phone handset.
Step 2 During an active call, press **8 to enable the privacy feature.
Step 3 During an active call, press **9 to disable the privacy feature.
Shared Line
This feature allows a user to have multiple phones that share the same phone number or allows a user to
share a phone number with a coworker. It enables the phone lines to barge into an existing call.
—If auto barge is enabled, off hook triggers C-barge.
To Next Page
Loading...
Need help?
General
