Cisco ATA 190 User Manual

A-1
Cisco ATA 190 Analog Telephone Adaptor Administration Guide for SIP (Version 1.0)
OL-31821-01
APPENDIX
A
ATA 190 Specifications
This section describes ATA190 specifications:
• Physical Specifications, page A-1
• Electrical Specifications, page A-2
• Environmental Specifications, page A-2
• Physical Interfaces, page A-3
• Ringing Characteristics, page A-3
• Software Specifications, page A-3
• SIP Compliance Reference Information, page A-4
Physical Specifications
Ta b l e A-1 Physical Specifications
Description Specification
Regulatory compliance FCC (Part 15 Class B), CE, ICES-003, A-Tick
certification, Restriction of Hazardous Substances
(RoHS), and UL
Power supply DC input voltage: 5V DC at 2.0A maximum power
consumption: 5W
Switching type (100-240V): Automatic
Power adapter: 100-240V and 50-60 Hz (26-34 VA) AC
input with 1.8m cord
Indicator lights and LEDs Phone 1, phone 2, internet, and power
Documentation Quick Start Guide
Administration Guide (available online)
Provisioning Guide (available online)
Environmental

Cisco ATA 190 Specifications

General

Ports	2 FXS ports
Operating Temperature	32 to 104°F (0 to 40°C)
Network Interface	10/100BASE-T Ethernet
Protocol Support	SIP
Power Supply	5V DC
Voice Codecs	G.711a, G.711u, G.729a, G.729ab
Relative Humidity	10 to 90% noncondensing