Cisco ATA 190 User Manual

4-4
Cisco ATA 190 Analog Telephone Adaptor Administration Guide for SIP (Version 1.0)
OL-31821-01
Chapter 4 Configuring the ATA 190
Configuring Product Specific Configuration Parameters
Configuring Product Specific Configuration Parameters
Cisco Unified Communications Manager Administration allows you to set some product specific
configuration parameters for the ATA 190.
Table 4-2 lists the configuration windows and their paths to
configure the parameters.
Redial Allows users to call the most recently dialed phone number
by pressing feature code *#.
Requires no configuration.
Shared line Allows a user to have several phones that share the same
phone number or allows a user to share a phone number with
a coworker.
For more information refer to the Cisco
Unified Communications Manager
System Guide,
Understanding Directory
Numbers.
Speed dialing Allows users to speed dial a phone number by entering an
assigned index code (1 to 199) on the phone keypad.
Note You can use Speed Dialing while on-hook or
off-hook.
Users assign index codes from the User Options web pages.
For more information, refer to:
• Cisco Unified Communications
Manager Administration Guide,
Cisco Unified IP Phone
Configuration.
• Cisco Unified Communications
Manager System Guide,
Cisco
Unified IP Phones.
Time Zone Update Updates the IP phone with time zone changes. For more information, refer to the Cisco
Unified Communications Manager
Administration Guide,
Date/Time Group
Configuration.
Voice-messaging
system
Enables callers to leave messages if calls are unanswered. For more information refer to:
• Cisco Unified Communications
Manager Administration Guide,
Cisco Voice-Mail Port
Configuration.
• Cisco Unified Communications
Manager System Guide,
Vo i c e M a i l
Connectivity to Cisco
Unified Communications Manager.
Table 4-1 Telephony Features for the ATA 190 (continued)
Feature Description Configuration Reference
Ta b l e 4-2 Configuration Information
Configuration Window Path
Enterprise Phone
Configuration window
System > Enterprise Phone Configuration
Common Phone Profile
window
Device > Device Settings > Common Phone Profile
Phone Configuration window Device > Phone; Product Specific Configuration portion of window

Cisco ATA 190 Specifications

General

Ports	2 FXS ports
Operating Temperature	32 to 104°F (0 to 40°C)
Network Interface	10/100BASE-T Ethernet
Protocol Support	SIP
Power Supply	5V DC
Voice Codecs	G.711a, G.711u, G.729a, G.729ab
Relative Humidity	10 to 90% noncondensing