Cisco CATALYST 2960 - Enabling the CNS Event Agent; You must enable the CNS event agent on the switch before you enable the CNS configuration agent.; Enabling an Initial Configuration; Beginning in privileged EXEC mode, follow these steps to enable the CNS configuration agent and initiate an initial configuration on the switch:

2-89
Catalyst 2960 Switch Command Reference
78-16882-01
Chapter 2 Catalyst 2960 Switch Cisco IOS Commands
interface range
Related Commands Command Description
define interface-range Creates an interface range macro.
show running-config Displays the configuration information currently running on the switch. For
syntax information, select Cisco IOS Configuration Fundamentals
Command Reference, Release 12.2 > File Management Commands >
Configuration File Management Commands.