Cisco CATALYST 2960

2-223
Catalyst 2960 Switch Command Reference
78-16882-01
Chapter 2 Catalyst 2960 Switch Cisco IOS Commands
policy-map
This example shows how to delete policymap2:
Switch(config)# no policy-map policymap2
You can verify your settings by entering the show policy-map privileged EXEC command.
Related Commands Command Description
class Defines a traffic classification match criteria (through the police, set, and
trust policy-map class configuration command) for the specified class-map
name.
class-map Creates a class map to be used for matching packets to the class whose name
you specify.
service-policy Applies a policy map to a port.
show mls qos vlan Displays the quality of service (QoS) policy maps attached to an SVI.
show policy-map Displays QoS policy maps.