Cisco CATALYST 2960

2-354
Catalyst 2960 Switch Command Reference
78-16882-01
Chapter 2 Catalyst 2960 Switch Cisco IOS Commands
show mls qos interface
mls qos srr-queue input dscp-map Maps DSCP values to an ingress queue or maps DSCP
values to a queue and to a threshold ID.
mls qos srr-queue input priority-queue Configures the ingress priority queue and guarantees
bandwidth.
mls qos srr-queue input threshold Assigns WTD threshold percentages to an ingress queue.
mls qos srr-queue output cos-map Maps CoS values to an egress queue or maps CoS values to
a queue and to a threshold ID.
mls qos srr-queue output dscp-map Maps DSCP values to an egress queue or maps DSCP
values to a queue and to a threshold ID.
policy-map Creates or modifies a policy map.
priority-queue Enables the egress expedite queue on a port.
queue-set Maps a port to a queue-set.
srr-queue bandwidth limit Limits the maximum output on a port.
srr-queue bandwidth shape Assigns the shaped weights and enables bandwidth shaping
on the four egress queues mapped to a port.
srr-queue bandwidth share Assigns the shared weights and enables bandwidth sharing
on the four egress queues mapped to a port.
Command Description