Cisco CATALYST 2960

2-381
Catalyst 2960 Switch Command Reference
78-16882-01
Chapter 2 Catalyst 2960 Switch Cisco IOS Commands
show sdm prefer
This is an example of output from the show sdm prefer qos command:
Switch# show sdm prefer qos
"qos" template:
The selected template optimizes the resources in
the switch to support this level of features for
0 routed interfaces and 255 VLANs.
number of unicast mac addresses: 8K
number of IPv4 IGMP groups: 256
number of IPv4/MAC qos aces: 384
number of IPv4/MAC security aces: 128
Related Commands Command Description
sdm prefer Sets the SDM template to maximize resources.